Financially & Environmentally “Friendly” FUELmaster

The future of lower heating bills has arrived. Hot water and central heating costs are unavoidable and becoming increasingly expensive but they can easily be managed keeping the size of your bills to the bare minimum. FUELmaster could provide the answer.

There are many ways to achieve lower fuel bills which range from changing your fuel supplier to the installation of cavity wall and loft insulation. How economical is your boiler?

Fuelmaster works equally well with boilers that burn Gas, Oil or LPG fuels, works on residential and semi-commercial boilers.

We at Tell Me First  have what is arguably one of the most effective, least expensive and quickest ways customers can maximise fuel cost savings with the minimum of financial outlay and causing the least inconvenience to install. A typical return on product investment can be achieved in less than 12 months.

Welcome to the “State of the Art” boiler efficiency manager.

Fuelmaster is a product that can significantly reduce the amount of fuel used by boilers by reducing and eliminating a wasteful process known within the heating and boiler industry as Dry Cycling, Short Cycling, Rapid Cycling or Boiler Cycling.

What is Dry Cycling?

This unnecessary firing process happens when the boiler is activated by its own internal thermostat to simply reheat the hot water held within itself. This hot water is not circulated around the system until an external thermostat asks the boiler to fire up properly to provide hot water to the required destination. These short intermittent firings are a highly wasteful process known by all boiler manufacturers and members of the heating industry. They can be compared to you boiling your kettle 3 or 4 times to make 1 cup of coffee or driving your car to its destination and leaving the engine running afterwards. You just would not do it so why let your boiler waste valuable money on expensive fuel and produce unnecessary. carbon emissions.

You can benefit from

  1. Much lower fuel bills reduced by at least 20%
  2. Far less boiler pollution by an average of 1.5 metric tonnes per year
  3. Greater Boiler efficiency helping to extend boiler life
  4. In many cases the boiler becomes quieter to run
  5. Fast payback on product cost (less than 12 months for an average home)
  6. Fuelmaster is portable so you can take it with you should you move home
  7. Simple, safe and quick installation with no mess
  8. 20 years or more of reliable fuel saving service
  9. No product service or maintenance requirements
  10. You have made a profitable and helpful but inexpensive investment

For more information please go to http://www.tell-me-first.com/fuel_master.htm, or e-mail infor@tell-me-first.com or call +357 22 879 424 (GMT +2)

This post is a sponsored blog post.

(Visited 4 times, 1 visits today)